Ham Shack V1.1

  • Posted on: 30 March 2015
  • By: Mike

Here is a picture of my setup.  

Radios (left to right)  

  • Baofeng GT-5 (2m/70cm HT)
  • Kenwood TK-780H (2m)
  • Kenwood TK-880H (70cm)
  • Leixen VV-898 (2m/70cm)

 My plan is to add a Kenwood TK-6110(6m) to the left of the 780, hanging from the shelf.  On the right, the Lexien is slated to be replaced with an Emproer TS5010(10m).

Under the Baofeng, is my 4 port microphone switch.  The Turner Plus Three microphone is sitting on the desk in front of the laptop (its stored up next to the Baofeng when not in use).

My soldering station can be seen in the far right.

Since this picture was taken, I have cleaned up the wires behind the 2 kenwoods, all thats really visible now, is the red patch cords for the mic conenctions.  I plan to replace these with black cords at some point.